The software allows you to backup the device configuration, as well as to make recovery and reset to the factory settings.
The software allows you to backup the settings of the monitoring unit in a file, as well as restore thebacup settings and reset them by default.
Backup settings to a file
To back up the current settings to a file on your computer, go to System menu-> Export and run Download current settings
| Info |
|---|
Please note that before you back up the sensor settings, you must save them using the Save to Flash button in the upper right corner |
Since v. 2.7.1 is available selective backup settings to a file.
Selective backup configuration file can be used for mass deployment of monitoring units on a facilities when it is expected to use multiple units with identical settings. One monitoring system is set up first, after which the settings of this system necessary to backup. Further backup settings are restored on other systems, and different parameters are set manually.
Backup settings
To backup the current settings to a file, in the System interface go to tab -> "System menu" -> "Export" and push button "OK" for "Download current settings"
...
To configure the backup settings on the ftp server on a schedule, go to Preferences-> FTP Backup
Description:
| # | Field | Definition |
|---|---|---|
| 1 | FTP Server | FTP server address |
| 2 | FTP port | FTP server port |
| 3 | Username | FTP server user |
| 4 | Password | The user's password on the FTP server |
| 5 | Target directory | Directory to save the settings on the FTP server (would be there!) |
| 6 | Execution interval | Backup settings range. Possible values:
|
| 7 | Day of backup | Day of the week or of month |
| 8 | Time of backup | Backup time |
To save the settings, click "Save".
...