Page Comparison

Table of Contents

Firmware update files and backup files have the same format as the self-extracting archive, so for thir their installation, the system uses same procedures.

...

1. From USB flash media, when it is connected to the USB port of the device. In this case, the update script runs, and if there is a firmware file with a predefined name (...) in the root directory, this file is installed in the system;
   
2. By HTTP, by downloading the firmware file to the device and then automatically updating it by submitting the form using the POST method to the upload-firmware.htm script. The data of the firmware file must be transferred to the field of the Filedata form, the key of the current session is accordingly transmitted to the field k.
3. By FTP, where FTP server's address is set in the ftp field general settings. And the upgrade call runs the update script on the ftp server from the server in accordance with the general system settings.

...

• recovery - the start of the restore configuration script; by default resets the sensor settings; parameters transfer is also available:
  
  • param - parameters, possible values:
    
    • all - restores the factory settings;