...
Option | Picture | Description |
---|---|---|
Main menu | Hide or Show main menu | |
Pen | First-time wizard for configuring language, time, network, SNMP, and user permissions. | |
Add element | Add a new element to the panel. This option appears in several panels such as “System tree”, and “Dry contact inputs”. | |
User name | Displays the current user name. | |
Save settings to flash | Save settings to flash (If this button is not pressed, all new settings will be lost if the system is restarted). Make sure you save settings to flash Flash after you have applied new configurations. | |
Logout | Log out from the web Interface session. |
...
2. The "Left menu panel" is opened by pressing a button at the top bar. It includes:
Main menu panel Description | Description | |
---|---|---|
Dashboard | configurable Configurable dashboard panel for displaying different sensor data. | |
Overall stats | shows Shows general statistics ;. | |
System tree | shows Shows all sensors and devices in a system tree (the tree is set up automatically by the system according to sensor groups) ;. | |
Dry outputs panel | for For configuring and controlling dry contact outputs. | |
Dry contacts panel | for For controlling and configuring dry contact inputs. | |
Event log | shows Shows the system log. | |
Logic schemes | to set automatic For setting up automatic actions on events happening in the system ;. | |
Cameras | shows Shows all cameras connected to the system ;. | |
Map | designed Designed for visual placement of elements on the plan/map ;. | |
Users | to manage user For managing user accounts and permissions ;. | |
CAN configuration to control CAN | devices; For CAN bus digital sensors and extension devices configuration. | |
Graphs | for comparative For comparative analysis of the history of sensor readings ;. | |
Outlets | Load management panel. | |
Reset smoke detectors | load management panel For resetting the alarm for all smoke sensors. | |
Access control | to manage For managing access keys, and readers; (this menu appears if the RFID reader is connected); | |
Preferences | Web GUI | Language, Time convention, Data reload interval, Temperature measuring scale, Start page, and others. |
Network | Network options. | |
Time | Manual or automatic time synchronization options. | |
Logging | Save the log to SD card, USB Flash drive, HDD, FTP log, Mail log, Syslog, and individual sensor data. | |
DynDNS | Enable DynDNS | |
SNMP | Enable SNMP | |
RADIUS | Enable RADIUS | |
FTP backup | Configure FTP backup | |
VPN client | Enable VPN client | |
Modbus RTU | Enable Modbus RTU. See Comparison chart: Master modules to check if your module supports Modbus RTU. | |
GPS | Requires VT740 LTE modem | |
SMTP | Needed for E-mail notifications. | |
Routing | For traffic that should not pass through the default gateway | |
System menu | About - | Firmware version, Web GUI version, operating system, browser, reboot the system ;Firmware - update control panel; . |
Firmware | For updating the KERNEL and Web Interface of the unit. | |
Export | Export sensor data, export log, and exportsystem settings; | |
Support - quick support links; |
First-time wizard
Info |
---|
Wizard is showing on the default user name - guest. Change it and the wizard is not showed again. |
...
To run the First-time wizard, click a magic pen at the top right corner of the web interface.
...
Quick support links |