| Table of Contents | ||
|---|---|---|
|
Introduction
All Vutlan monitoring systems and switched PDUs can connect up to two alarm beacons, for example, a siren and/or strobe, and other low-current devices, for example, a dry contact output module VT11, to E1, E2 - two outputs of electronic relays.
...
| Warning |
|---|
Do not connect the loads to the outputs while the monitoring system is on. |
...
Further reading
...
Vutlan accessories for 12V DC outputs
| Child pages (Children Display) |
|---|
12V DC relay outputs configuration
The page linked: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/601030668