Page Comparison

...

• To disable Hilink mode in old Huawei modems, for example in E3232, connect the modem into USB-port and go to the browser at http://192.168.1.1/html/switchProjectMode.html
  The modem restarts and in a Device Manager You can see two serial interfaces  
• May be will need Huawei Modem Driver
• Switch to "modem only" - run the program Huawei Modem Terminal. Later in the program, select your device from the top «HUAWEI Mobile Connect - 3G PC UI Interface» and push Connect. Then need to check whether modem is responsible . In the bottom string write command AT and push Enter. You should see something like:

Send: AT

Recieve: AT
Recieve: OK

  If it happened that way so , the modem is responsible, and we can give him commands. Switch it to the "modem only" state by command:

...