VT8101 has the possibility to connect two alarm lights or sirens managed by built-in relays to the 12V output and to the input Reader / 1Wire. VT800, VT8110 appliances the possibility to connect one light or siren managed by built-in electronic relay to the input Reader / 1Wire.
Connecting alarm beacons to 12V
...
outputs of VT8101 and VT200.
To connect an external load, light or siren, connect the wires from the alarm device to the appropriateclamps appropriate clamps of the relay terminal plug. Insert the plug into the relay socket terminal 12V12 V. By command, relay will switch on or off the load. The maximum possible output current of the relay - 0.25A.
...