VT11 / Dry Contact Output

Function and purpose

Detects vibration. For installation on walls, windows, etc., sensor controls vibration. For example, detects breaking of window by an intruder if installed on a window glass. Chain connection is possible.

Package includes

Package content can be found at : VT540 package content

Connecting vibration sensor

Sensor uses standard Vutlan analog sensor cable for connecting to the monitoring unit. You can find further instructions at: Analog sensors connection

Sensor can also have a chain connection. Up to 10 sensors in one chain. In this case all sensors in a chain are seen by the system as one sensor.

Installation using a sticker and a bracket

Option 1.

There's a round bump at the bottom of the plastic enclosure of the sensor. It is used for fastening when the sensor is mounted together with the on walls using a screw. In current example it is not needed. If you are planning to mount a device differently, do not follow this step.

Cut the round bump using a knife so that the bottom of plastic enclosure will be flat.

Option 2.

a) Stick the mounting sensor to the surface using the sticker.

or

b) Stick a sensor to the surface using a screw.

Option 3.

Mount the sensor to the surface using a mounting bracket. Mounting bracket and the sensor can be either attached by the stickers or together with screws and nuts.

Cable pinouts