Content
Documentation page:
Product page:
 |  |
 |  |
Function and purpose
Unique long-term stability
Advanced particle size binning
Superior precision in mass concentration and number concentration sensing
VT580 dust particle sensor is used to monitor air quality and pollution. The sensor is a technological breakthrough in particle matter sensors. Its measurement principle is based on laser scattering and based on innovative contamination-resistance technology. The probe enables precise measurements from its first operation and throughout its lifetime of more than ten years. VT580 has superior precision for different particle matter (PM) types and higher-resolution particle size binning, opening up new possibilities for detecting different sorts of environmental dust and other particles.
VT580 is an analog sensor and it can be connected to any analog port (A1...A8) of the Vutlan monitoring unit. The sensor is plug-and-play and can be configured for event-triggering via logic schemes.
The maximum amount of VT580 sensors connected to the Vutlan monitoring unit and maximum length can be extended using the "VT408 / Sensor extension unit" or “VT408DIN / Extension unit”.
Connecting the sensor
The sensor can be connected to the system's available analog ports. See the picture below.
The sensor can be connected to the “VT408 / Extension unit”. See the picture below.
The sensor can be connected to the “VT408DIN / Extension unit”. See the picture below.
Technical specifications
General parameters | Description |
Type: | Analog sensor |
Usage: | |
Technology: | |
Daisy chain connection: | Not possible |
HS Code: | |
Manufactured in (country): | Manufactured in Slovak Republic, E.U. |
Certification standards: | |
LEDs: | |
Hardware parameters | Description/value |
Operating Temperature: | |
Storage temperature: | from -40° С to +100° C |
Operating humidity: | Sensor PCB board: 0 to 85% |
Storage humidity: | 0 to 95 % |
Power Consumption: | |
Installation | |
Cable length: | |
Mounting possibilities: | Wall or ceiling mount |
Output terminal: | RJ-11 / 6P4C |
Max. distance from the unit: | 100 meters from Vutlan controller or from “VT408 / extension unit” or from “VT408DIN / DIN extension unit” |
Drawings
VT580 dimensions:
Installation
Step 1. Mount
Step 2. Use
Step 3. Mount the ball holder onto the sensor as shown in the picture below.
Package includes
Analog sensor connection
Linked page Analog sensors connection
Sensor configuration
Linked page Sensor configuration
Copyright:
Vutlan s.r.o. (LLC)
Remote Infrastructure Monitoring and Control
43 ul.Svornosti, 821 06 Bratislava,
Slovak Republic