AC. DC metering
Connect AC, and DC transceiver with a supplied RJ-11 (6P4C) or RJ-12 (6P6C) cable to any analog port "A1 .. A8" or "Sensor" port. Determination of the sensor type and connection will occur automatically. Connect transceivers to AC, and DC meters by any 2/4 wire cable.
...
...
developer notes: change picture (addchange)
This procedure applies to the following AC, and DC devices, which are supported by the appliance and are connected to the analog ports:
AC DC transceivers | Metered | Isolation | Connected AC, DC meter | |
---|---|---|---|---|
1 |
HOS-100V1
0-5 V | □ | HAT-100V1 |
2 | 0-75 V | 1 kV | □ |
3 | 4-20 mA | 1 kV | 4-20mA outputs |
Note |
---|
For VT410 use only a 3-pair (6P6C) cable for sensor connection! |
Connect the transceiver to the monitoring unit
developer notes: change picture (addchange)
Connect transceiver to Hall sensor
developer notes: add picture (addchange)
Measure DC voltage
developer notes: add picture (addchange)
Connect transceiver to 4-20mA outputs
...