Page Comparison

Image Modified    End of Life:  30  30.11.2022

Product page: https://vutlan.com/remote-monitoring-units/89-vt805-remote-monitoring-unit.htmlImage Removed

...

Image Removed

1. "CAN" - digital connector RJ12 for the connection of CAN sensors and CAN extensions on a CAN bus, with auto-sensing.

2. LEDs:

• "ACT" - indicates appliance status:    

         - operating mode of the device: switches at a frequency of 2 times per second;

         - successful completion of the software update process: switches at a frequency of 4 times per second;

• "E1" - indicates 12V E1 relay status;

• "E2" - indicates 12V E2 relay status;

• "ERROR" - indicates error and traffic:

          - operating mode of the device: the norm is extinguished, not the norm - a constant glow;

          - режим обновления ПО: переключается с частотой 2 раза в секунду;

• Blinking "ACT" ............ • Blinking "E1" ............ • Blinking "E2"............ • Blinking "ERROR" ..........

...

6. LEDs: "CAN" - indicates CAN bus status:

• "CAN" blinks slowly - nothing is connected

• "CAN" blinks fast - configuration is in process

• "CAN" glows constantly - connected to CAN devices

7. "1-WIRE" - can be used with VT10 / 1-Wire extension board". Allows connecting 1-Wire reader or 1-Wire temperature sensors in serial line. Has "1-WIRE" status led.

...

9. This is a slot for "VT760 / Internal LTE modem". Modem The modem is purchased separately!

9a."Main antenna" - Connector, used when the LTE modem is installed inside of the appliance to connect LTE main antenna. (The main antenna is supplied together with the modem).

...

Recovery ↓ On - use this option only in case you need to recover manufacturing settings.

14. "Image RemovedImage Added" - External chassis grounding, M4 thread.

15. "TEMPERATURE SENSOR" - accuracy +/- 1 °C°C.

16. "DRY CONTACTS 1...4" - Dry contacts terminal (type IN)

17. "OUTPUT 12V 0.25A" - 12V 0.25A output electronic relay teminalterminal

Inventory

Developer notes: metal case VT335 v1.2