...
To test sms, click the Send sms button. In this case, the macros in the message text will be displayed in their original form (% ..). To apply the settings, click the Save button.
| Warning |
|---|
When You press "test message", the system send a test message to test if the SMS is sent correctly. A test SMS does not contain macrosses, it is empty. |
| Info |
|---|
In order to test macroses of the notification You need to create a test logic or use an existing logic. E.g. a logic scheme may look like: if sensor goes to alarm state, then send SMS. After You save the logic and bring the sensor into an alarm state, You should receive SMS with macroses. |
After filling in the notification parameters, you must specify the event (events) by which the sms message will be sent. To do this, open the Preferences → Logic schemes → Add window and specify the condition for sending the sms message in the logic. In one logic, it is possible to send SMS notifications to not more than 15 recipients for one or more events. If you need to send sms notifications to more than 15 recipients in the same logic, then create new logic with the same input condition.
...