...
Connect CAN devices to any port CAN1 or CAN2 on the monitoring system using a cable supplied. CAN sensors can also be connected to the port of another CAN sensor or CAN unit that is connected to the CAN bus. Determination of the devices and their connection is done through a web interface.
Info You can connect up to a maximum of x12 CAN sensors and CAN devices together on one CAN bus (approximately)!
If you want to connect more than x12 CAN units, you need to use CAN-12V-1A / CAN Power Supply
| Info |
|---|
You can connect up to x32 CAN units in a CAN bus chain. |
The TR should be "ON" for the last sensor on each bus "CAN 1" and "CAN 2". See section "TR" below.
...
This procedure applies to the following sensors, which are supported by the appliance and are connected to the CAN ports:
...