Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Datasheet page: https://vutlan.atlassian.net/l/cp/hbgCqy8S

Image Modified

Image Modified

Image Modified

Function and purpose

A high-performance sensor/detector using microwave radar as a control signal source to detect objects or human movement. This product is an indoor energy-saving high-sensitivity detector.

The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls.

The sensor also has a built-in vibration and humidity sensors.

The maximum amount of sensors connected to the Vutlan monitoring unit and maximum length can be extended using the "VT408 / Sensor extension unit" or “VT408DIN / Extension unitsensor is a CAN bus digital device and can be connected in a chain to any Vutlan monitoring unit.

Microwave radar vs PIR

Why Microwave motion sensor? Quick response time, Higher accuracy than PIR, The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls. This microwave motion sensor reflects the latest development in motion detection technology.

Example: Air-conditioning can be a problem for PIR sensors, especially in rooms adapted for server rooms, where sensors are activated by violent gusts of air. That is why using microwave radar detectors makes sense.

Physical description

...

1. "CAN" - two equivalent digital RJ12 ports for connecting CAN sensors and CAN extensions to a common bus. The order of connection does not matter.

...

9. "Motion window" - The motion sensor movement detection window.

Technical specifications

General parameters

Description

Type:

CAN digital sensor

Usage:

Motion, movement, position, proximity detector/sensor.

Temperature detection.

Vibration detection.

Technology:

Motion: Doppler Principle (transmit and receive signals) using microwave radar with minituarized planar antennas

Daisy chain connection:

Yes, possible with different CAN sensors and modules.

HS Code:

8531 80 950

Manufactured in (country):

Manufactured in Slovak Republic, E.U.

Certification standards:

FCC/CE/SRRC/RoHS

LEDs:

Red when movement detected. Green when no movement detected.

 

RF parameters

Description/value

Frequency Range:

5.725GHz-5.875GHz

Transmit Power:

-4dBm

Antenna:

Built-in flat antennas

 

Temperature sensor

Description/value

Tolerance:

±1 ℃

Hardware parameters

Description/value

Operating Temperature:

Sensor PCB board: from -20 ℃ to +85 ℃

ABS plastic enclosure: from -20 ℃ to +80 °C

PVC RJ cable: from -15 ℃ to +80 °C

Storage temperature:

from -40° С to +100° C

Operating humidity:

Sensor PCB board: 0 to 85%

Storage humidity:

0 to 95 %

Power Consumption:

100 mW

 

 

Installation

 

Installation height:

3 meters is recommended

Detection angle:

120° degrees

Sensing distance:

maximum is 12 meters

Inducting distance:

Radius About 5-6m

Max. Induction Radius:

The radius is 6 meters when hanging height is 3 meters

Cable length:

2 meters

Mounting possibilities:

Wall or ceiling mount

Output terminal:

RJ-11 / 6P4C

Max. distance from the unit:

100 meters from Vutlan controller or from “VT408 / extension unit” or from “VT408DIN / DIN extension unit

Induction range

The graphs below are showing the distance in meters. The darker area in the figures below shows where the sensor’s sensitivity is high, while the light area has low sensitivity.

...

Connecting the sensor on a CAN bus chain

The sensor can be connected in a CAN chain with other CAN sensors.

...

3. If the sensor is the last sensor in a CAN bus chain, switch the switch at the back of the sensor to the “ON” position. Otherwise, switch it to the

“OFF” position.

...

Sensor installation/mounting

  1. Attach “Wall mount part 2” as shown in the picture below.

...

4. Rotate the sensor to make the Motion detection window face a location of possible movement threat.

...

Drawings

...

View file
nameVT470 microwave CAN bus motion vibration temperature sensor detector drawing dimensions.pdf

VT470 package content

Include Page
VT470 package content v1 (legacy)
VT470 package content v1 (legacy)

Settings up CAN

Include Page
Setting up CAN
Setting up CAN

...