Page Comparison

Table of Contents

style	none

...

Usage

Allows to receive and send SMS messages (2G, 3G). Provides Ethernet over LTE (4G).

VT740 allows you to receive notifications over Ethernet, SMS notifications, SNMP connection, and others.

Provides network reservation: e.g. if the LAN connection fails, the Ethernet connection is secured using LTE 4G.

Can be installed in VT335t , VT336t, VT825t, VT855t, and VT960t monitoring systems. Power cycling is an embedded function.

Info
The same PCB of VT740 is used for `i` and `t` series (e.g. VT335i and VT335t). But The metal enclosures use a different metal panel for holding the modem. `t` series have an additional screw to hold the panel. Thus the installation is slightly different. But in all other regards, it is the same.

...

...

Function & purpose	Description
Used for:	Network reservation, SMS notification messages, Ethernet access, Control over AT commands
Device type:	Extenion slot
Used for:	VT335t, VT336t, VT825t, VT855t, VT960t monitoring systems

Communication	Description
Chip:	SIMCom, SIM7600E
Frequency Bands Supported:	2G: GSM 900 (B8), GSM 1800 (B3) 3G: UMTS 900 (B8), UMTS 2100 (B1) 4G: LTE 900 (B8), LTE 1800 (B3), LTE 2100 (B1)
TX - GSM:	900 MHz to 12.75 GHz
TX - LTE:	30 MHz to 12.75 GHz
Specific Frequencies and Frequency Bands Supported:	2G: 900 MHz (B8): 902.40 MHz 1800 MHz (B3): 1750 MHz 3G: 900 MHz (B8): 883.53 MHz 2100 MHz (B1): 1922.60 MHz 4G: 900 MHz (B8): 899.45 MHz 1800 MHz (B3): 1745.63 MHz
GNSS:	gpsOne Gen 8B;standalone;assisted,XTRA
Uplink:	up to 5Mbps
Downlink:	up to 10Mbps

General	Description
Manufactured in:	Slovak Republic, EU. Vutlan s.r.o.
HS code:	9025 11 800
GTIN:	8588009886341
Certificates:	ROHS, REACH, CE

Include Page

	VT740 package content
	VT740 package content

...

"Main antenna" - Connector, used when the modem is installed inside of the appliance to connect the LTE main antenna. ( The main antenna is supplied together with the modem).
"SIM card" - SIM card slot with an injector.
"Status" - displays modem status. Blinking = working.
"Auxiliary" - Connector, used when the modem is installed inside of the appliance to connect LTE auxiliary antenna. The additional antenna helps to strengthen the signal level. ( Auxiliary LTE antenna is supplied together with the modem).

...

Specifications

...

Control Via AT Commands

...

GNSS gpsOne Gen 8B;standalone;assisted,XTRA

...

Uplink up to 5Mbps, Downlink up to 10Mbps

...

ROHS, REACH, CE

You can install the modem while the system is turned On. You may wait up to 3 minutes until the Telecom operator information is renewed.

Step 1	Image RemovedImage Added	Unscrew the M3 screw from the LTE metal panel.
Step 2	Image RemovedImage Added	Use the wire cutter tool to cut off the metal inserts. You can dispose of the metal inserts.
Step 3	Image RemovedImage Added	Plug the VT740 slot modem as shown on the picture into the opening. The board should slide into the guide rails (marked as “1”) and plug into the jack (marked as “2”).
Step 4	Image RemovedImage Added	Put the LTE metal panel back in (marked as “1”). Screw the M3 screw back in fixating the LTE metal panel (marked as “2”).
Step 5	Image RemovedImage Added	Screw the main LTE antenna into “Main” antenna” jack. If you want to strengthen the signal, you can screw in the second auxiliary antenna into “Auxiliary” jack.
Step 6	Image Added	Plug in the micro SIM card. The SIM card slot has an injector.
Step 7		You are ready to go! Turn on the system. You can install the modem while the system is turned On. You may wait up to 3 minutes until the Telecom operator information is renewed.