Page Comparison

Applicable for driver version: 2.3.0 - 2.4.4 and higher

Date of release: 18.04.2013

Firmware for factory settings recovery

This firmwares designed to reset settings the monitoring systems SC81xx/SC21xx/SC11xx Sky Control

Recovery the access password:

• sky25resetusers.sky - Login and password recovery by default: guest;

For recovery-tools.zip recovery pack:

• sky25firmware-factory-recovery.sky  - restore the system settings to factory:

  • network settings: ip: 192.168.0.193/24, gateway: 192.168.0.1

  • login: guest; password: guest;

  • sensor settings are reset by default;

• sky25firmware-network-recovery.sky  - restore the network settings to factory:
  • ip: 192.168.0.193/24, gateway: 192.168.0.1
• sky25firmware-password-recovery.sky - restore the user password to factory: 
  
  • password: guest;

Applying firmware

• by web-interface: 
  
  • System menu -> Upload new firmware
• by usb-flash: 
  
  • rename the firmware file to sky25firmware.sky;
  • put this file to usb-flash drive;
  • connect usb-flash drive to front panel;
  • after reset system (all the green leds go out) remove the usb-flash drive;

Installation instructions can be found here: English, Russian.

To allow us better support please leave your comments below or on our forum.