...
MAC address | MAC address of your device, can not be changed | |
Current IP address | The current IP address of the device assigned by the user (static) or by DHCP | |
LTE IP address | The IP address of LTE network, if the connection is established and address is assigned | |
Hostname | Host name of the device, must not contain characters: space, point (dot), comma, colon and semicolon ( , . : ; ) | |
Enable DHCP | Enable or disable DHCP IP address binding | |
IP Address | The static IP address of the device set by the user | |
Network mask | Netmask | |
Broadcast | Broadcast address | |
Gateway | Default gateway. If the default gateway is not known, use the IP address of the computer in the network of the device, which is usually included. The device uses the default gateway to test the network with low traffic. | |
Primary DNS | Primary DNS | |
Second DNS | Secondary DNS | |
Third DNS | Third DNS | |
HTTP port | HTTP port | |
Enable TLS | Enable of the required TLS version. Affects all encrypted connections such as HTTPS, SMTP and others. | |
Enable HTTPS | Enable or disable HTTPS. HTTPS uses an encryption protocol to encrypt communications. If the user is working with the monitoring unit via the HTTPS interface, a self-signed certificate is created. Alternatively, the user can use his own SSL certificate: https://vutlan.atlassian.net/wiki/display/DEN/SSL-certificate+installation. | |
User certificate | Allows uploading the certificate file for HTTPS | |
Private key | Allows uploading the key file for HTTPS | |
Enable DHCP | Enable or disable DHCP connectionSelf-signed certificate | Button for in-system generation of self-signed certificate for HTTPS. Certificate generation can take some time. |
Enable CAN | Enable or disable CAN, needed for CAN sensors and modules | |
Enable SSH (only available on VT960 ) | Enable or Disable SSH |
...