...
Warning |
---|
Only 6P6C RJ12 cable can be used with sensor! The cable is included with the sensor. |
1.Connect one end of shielded 6P6C RJ12 cable to any Vutlan monitoring unit's analog port A1-A8, and the other end to VT410 / DC Voltage Monitor.
2.Connect "+" and "-" to the 2P terminal.
3.Insert the terminal into VT410.
Examples
Example 1: measurement of battery voltage
...
Example 2: measurement 48V electric circuit
Configuration
Connect transceiver to power adapter 12V. Connect transceiver and transducer with Connecting cable. The Once VT410 was connected to the analog ports of Vutlan monitoring system, the monitoring system will automatically sense current transducer as a sensor.
The new sensor It will appear in the web interface of the system. Click on : "System tree" menu and you will find a new sensor marked by an icon " >> "Autodetect" >> (abreviation from: Voltage function, used for sensor monitors and converters).
Click on the sensor to open it's properties. A modal window with sensor properties will pop up.
...