...
| Include Page | ||||
|---|---|---|---|---|
|
Panel
-01.webp?version=1&modificationDate=1738679207850&cacheVersion=1&api=v2&width=760)
-01.webp?version=1&modificationDate=1738679207850&cacheVersion=1&api=v2&width=352)
"SIM card" - SIM card slot with an injector.
"Status" - displays modem status. Blinking = working.
"Antenna" - Connector, for connecting the LTE antenna. (The antenna is supplied together with the modem).
...
Step 1 |  | Unscrew the M3 screw from the LTE metal panel. |
Step 2 |  | Use the wire cutter tool to cut off the metal inserts. You can dispose of the metal inserts. |
Step 3 |  | Plug the VT7670 slot modem as shown on in the picture into the opening. The board should slide into the guide rails (marked as “1”) and plug into the jack (marked as “2”). |
Step 4 |  | Put the LTE metal panel back in (marked as “1”). Screw the M3 screw back in fixating the LTE metal panel (marked as “2”). |
Step 5 |  | Screw the main LTE antenna into “Main” antenna” jack.If you want to strengthen the signal, you can screw in the second auxiliary antenna into “Auxiliary” jack. |
Step 6 |  | Plug in the micro SIM card. The SIM card slot has an injector. |
Step 7 | You are ready to go! Turn on the system. You can install the modem while the system is turned On. You may wait up to 3 minutes until the Telecom operator information is renewed. |
...