...
Step 1 |  | Unscrew the M3 screw from the LTE metal panel. |
Step 2 |  | Use the wire cutter tool to cut off the metal inserts. You can dispose of the metal inserts. |
Step 3 |  | Plug the VT740 slot modem as shown on the picture into the opening. The board should slide into the guide rails (marked as “1”) and plug into the jack (marked as “2”). |
Step 4 |  | Put the LTE metal panel back in (marked as “1”). Screw the M3 screw back in fixating the LTE metal panel (marked as “2”). |
Step 5 |  | Screw the main LTE antenna into “Main” antenna” jack. If you want to strengthen the signal, you can screw in the second auxiliary antenna into “Auxiliary” jack. |
Step 6 |  | Plug in the micro SIM card. The SIM card slot has an injector. |
Step 7 | You are ready to go! Turn on the system. You can install the modem while the system is turned On. You may wait up to 3 minutes until the Telecom operator information is renewed. |
IMEI number
The International Mobile Equipment Identity number is a unique identifier assigned to LTE modems and other cellular devices. Uniquely identifies the LTE modem on the cellular network. It allows mobile operators to verify the type of device and its compatibility with the network.
The IMEI will show in the Vutlan web interface only after you insert the SIM card in the modem and wait for the information to update (up to 5 minutes).
...
The modem is inserted. A SIM card is inserted. IMEI is not showing up. What to do?
Ensure the SIM card is inserted correctly, and the modem is powered on.
Open the Vutlan system's interface and navigate to the modem settings or device information section.
Locate the IMEI number physically printed on the modem itself.
Copy the IMEI number and provide it to your Telecom provider, requesting them to register the device on their network.
...
Setting up GSM modem
Page linked https://vutlan.atlassian.net/wiki/spaces/DEN/pages/625016833/Setting+up+GSM+modem
...