...
Package content can be found at : VT591 & WDC package content
Connecting
...
WDC / Water detection rope
- Connect WDC rope sensor to the VT591 leak sensor.
- Wire the WDC rope around or under potentially leaking objects around the perimeter or under raised floors.
- Cconnect the sensor to the monitoring unit. Connection is plug-an-play.
- Sensor is ready to use.
Connecting WLC / Water leak cable
- Connect the "VT591 / Water leak sensor" to the monitoring unit. Connection is plug-an-play.
- Connect "VTC / Terminal cable" to VT591 sensor.
- Connect "WLC / Water detection cable" to "VTC / Terminal cable".
- Connect any additional "WLC / Water detection cables" to each other as shown on picture above to make a chain connection.
- Wire the WLC rope around or under potentially leaking objects around the perimeter or under raised floors.
- Put a protective cap on the connector of the last WLC cable in a chain.
- Sensor is ready to use.
Installation examples
...
Sensor uses standard Vutlan analog sensor cable(RJ11/RJ12 to RJ11/RJ12) for connecting to the monitoring unit. You can find further instructions at: Analog sensors connection
Technical specifications
VT591 / Water leak sensor specifications | |
|---|---|
| Dimensions | 60×18×18 mm |
| Weight | 60 g |
| Input | 2 wire (WDC cable) |
| Output | RJ11 / RJ12 (6p4c) |
| Operating temperature | Temperature : Min. -10 °C - Max.80 °C |
| Operating humidity | Humidity : Min. 5% - Max. 95% (Non-Condensing) |
| Mounting | Mounting bracket included. |
| Power consumption | 60mW |
| Max. distance m | 100 m |
| HS Code | 9025 80 400 |
| Components | Manufactured in E.U. |
| Special features | Response time: 15 sec., Recovery time: Depends on how fast the sensor dries out |
WDC / Water detection rope specifications | |
|---|---|
| Description | WDC can detect moisture (works until the dew point) and does not welcome pollution! |
| Detectable liquids | Clean, polluted & distilled water; acids; alkalis; alcohols and other electrically conductive liquid |
| Diameter | 3 mm diameter |
| Lengths | Order options include 6m, 10m, 17m, 25m, 50m or custom length. |
| Weight | 15 g/m |
| Operating temperature | Min. -50° C, Max. 105° C |
| Max. rope length | 225 m |
| Conductor | 27% Ni |
WLC / Water leak cable specifications | |
|---|---|
| Description | WLC can work in high humidity, pollution and hazardous waste |
| Detectable liquids | Clean, polluted & distilled water; acids; alkalis; alcohols and other electrically conductive liquid |
| Diameter | 5.5 mm diameter |
| Lengths | Order options include 10m, 15m, 25m, 50m or custom length. |
| Weight | 26 g/m |
| Operating humidity | 0° - 100 % |
| Max. cable length | 225 m |
| Inputs | x2 wires |