...
- k - user session ID;
- id - the identifier of the element;
- name - the name of the element, the length is not more than 63 characters;
- initial - the normal state of the key (possible values on and off), is set at the time the system is started;
- pulse - the time in seconds, to which the key is transferred from the normal state (determined by the initial field) to the opposite one at the command "sendpulse";
- value - the state to switch the relay (possible values on, off, pulse), can be used without initial and pulse fields.
sendpulse - generation of a pulse of a given duration. In this case, the key is transferred from the normal state (the initial field in the updateelement command) to the opposite one, and after a specified time again returns to the normal state. Extra options are:
...