...
DC monitor is used for measurement of DC voltage and converting data into the format of IP monitoring system. The system interface allows you to assign the sensor and to introduce the function data conversion.
VT410 75V: measured measured voltage 0-15V
VT410 15V: measured voltage 0-75V, the better measurement for low voltages.
...
Installation
| Warning |
|---|
Only a 6P6C RJ12 cable can be used with the sensor! The cable is included with the sensor. |
1. Connect one end of the shielded 6P6C RJ12 cable to any Vutlan monitoring unit's analog port A1-A8 , and the other end to the VT410 / DC Voltage Monitor.
...
Once VT410 was connected to the analog ports of the Vutlan monitoring system, the monitoring system will automatically sense the current transducer as a sensor. It will appear in: "System tree" >> "Autodetect" >> .jpg?version=1&modificationDate=1536589704774&cacheVersion=1&api=v2)
(abreviation abbreviation from: Voltage function, used for sensor monitors and converters)
...
Click on the sensor to open it's its properties. A modal window with sensor properties will pop up.
.jpg?version=1&modificationDate=1536650302391&cacheVersion=1&api=v2&width=500)
1. Change the name of the sensor, for example, "DC Voltage monitor 1".
2. Change the type of the sensor by choosing "Voltage". Choosing any type of the sensor does not affect sensor properties, it only changes the sensor icon for the comfort of usage. For this example, the icon will be .jpg?version=1&modificationDate=1536650451648&cacheVersion=1&api=v2)
3. Use "Expression formula": Each sensor has it's its own expression formula. It is printed on the case of the sensor. For example:
...
This current sensor has an expression formular formula equal to "14.993*(x-0.019)
...