...
Then install files custom.pem and custom.key in accordance with the certificate installation procedure.To
You can install your own certificate need to copy certificate file (s) on the USB-flash stick and rename them respectively custom.pem and custom.key. Then connect the USB-stick to the unit. After the completion of the exchange (the LED on the USB-stick is flashing on and off), remove the USB-flash drive and open the web interface via HTTPS.
Or upload certificate and key file by Network settings.
...
certificate on the Preferences -> Network page. You must enable HTTPS and upload the key and certificate files.
After clicking the Save button, the settings will be saved and the system will automatically restart with new settings.
| Info |
|---|
If the certificate files with an error and cannot be used by the system, then the system will use safe settings: port 80, HTTPS is disabled. The log will be a corresponding error message. |
Certificate installation for versions 
2.5
...