...
14. "Modem" - "VT770 / LTE, GPS modem" is ordered separately. Read instructions at "Connecting VT770 / LTE , GPS modem with GNSS", "Network: LAN, GSM, LTE, RADIUS, DNS, SSL, VPN".
- "Modem status" - LED displays modems status.
- "SIM card slot" - Open the top cover to insert a SIM card.
- "GSM, LTE main antenna" - Connect GSM or LTE main antenna.
- "LTE auxiliary antenna" - Connect LTE auxiliary antenna (Auxiliary LTE antenna and antenna output are ordered separately from the modem). It helps to establish a stronger and more stable signal.
- "GPS active antenna" - GPS antenna and antenna output are ordered separately from the modem. Allows to set the time using GPS and shows the location of the device on the map.
...
1 |
| |
2 | Simply slide it inside the empty spaces until it clicks. | |
3 | Use a screwdriver to pull it out. |
Using the table above, you can mount the cables.
Include Page | ||
---|---|---|
|
The system uses terminal blocks for several interfaces:
- x4 dry contact inputs
- x2 Electronic relay outputs
- x2 Isolated digital outputs
- RS-485 Modbus RTU
- Power supply input
They share the same characteristics.
...
...
...
...
Terminal blocks
Step: 5.08 mm
...
...
6 - 7 mm
0.23 - 0.27 in
...
2.5 mm²
0.09 in²
#26 - #12 AWG
...
Flat
3.5 mm
0.13 in
|
Device configuration
...