Latest Vutlan drivers for T series (VT225t, VT335t, VT336t, VT604t, VT608t, VT825t, VT855t)

7.2.1-b392

• Picking up the log of the previous session from media (SD card, USB flash)

• Changed CSV format in sensor value dump file in Charts → Export data → CSV

• Special characters in passwords

• Fix double percentage (%%) for macro %9 to specify the measurement value for humidity and signal sensors

08.10.2024

7.2.1-b210

• A unique SNMPv3 Engine ID based on the MAC

• Additional hardware reset of the LTE modem in case of prolonged network loss

• Editing logic schemes containing ‘Modules’

• Dry contacts Initialization for VT825t, VT855t

21.08.2024

7.2.1-b205

• Software shutdown the system

• Possibility to interrupt LTE when dialing a number

• Macros %9{id} parameterization

• FTP backup settings

• Time setting when “Automatically synchronize time“ is disabled and “Daylight saving time“ is enabled

12.08.2024

7.2.1-b150

• Pulse control for “Outlets” and “Dry outputs” tabs

• Additional information in the “Event log” details - Element ID and Hardware port

• Address 0.0.0.0 is valid for the Routing function

30.05.2024

7.2.1-b137

• Error messages not show

23.04.2024

7.2.1-b136

• OSDP readers support

• New macros for notifications

• Rounding for virtual Math sensor

• Hysteresis not saved

19.04.2024

7.2.0-b102

• Supervisor for logging of user sessions

• Mounting the SD card with a “N - R" DIP switch in the "Normal mode" position (this update requires Restore of appliance). SD card for logging is not working in “N” position but it is working in “R” position.

19.02.2024

7.1.1-b123

• Relay control for VT604t and VT608t units

23.01.2024

7.1.1-b118

• The possibility of drawing on the map

• Support for new units VT336t, VT604t, VT608t, VT855t

• Rounding for the “Expression” formula for calculating the value for Modbus sensors

28.12.2023

7.0.1-b161

• LTE connection stuck

• CAN humidity sensor limit to 100%

• Timer monthly mode

16.11.2023

7.0.1-b134

• Support SNMP GET v3

• Support JSON HTTP Request

• Partial support JSON API

• Detection of analog sensors

11.10.2023

File for HTTP upgrade:

File for Restore of appliance :

vutlan-VT855t-7.2.1-b392-factory.img

File for USB upgrade :

Settings recovery tools:

tools.zip

• settings.vut - network address changes to 192.168.0.101;

• resetusers.vut - add default user: Login: guest / Password: guest. It does not affect other user entries.

Read more at: USB upgrade or restore of default settings.