LR800 Gateway & Server

User guide: https://vutlan.atlassian.net/wiki/spaces/DEN/pages/4213997570

Product page: LR800 product page

Package content: LR800 package content

Drivers: Latest Vutlan drivers for LR800

Open

Open

Function and purpose

The “LR800 Gateway and Server” delivers reliable LoRa coverage across large environments, connecting extensive sensor networks with stability and precision. Its robust signal penetration ensures seamless communication over long distances - all while collecting, storing, and forwarding data effortlessly.

Key Features:

• LoRaWAN compatible: Long-range LoRaWAN connectivity. Supports large-scale sensor networks. Frequency Band EU868. Private LoRaWAN Network.

• Environmental Monitoring: Continuously measures essential environmental factors to ensure optimal conditions, preventing equipment damage and operational failures.

• Flexible Configuration: Users can manage up to 1,000 different elements, including notifications, triggers, timers, and logic schemes, allowing for tailored monitoring solutions that meet specific needs.

• Centralized monitoring in one interface: A built-in web interface provides access to virtual sensors, logic schemes, and diverse notification types, simplifying user interaction and enhancing accessibility.

• Remote Connectivity: With a dedicated slot for an LTE modem, the LR800 ensures a reliable Ethernet connection, making remote monitoring and management convenient and efficient.

• Real-time data and instant alerts: Email, Push, Telegram, SMS, Syslog, Event Log, SNMP Trap, and SNMP Get

Sensor support

LoRaWAN sensors, CAN devices/sensors. Modbus TCP.

Possible extensions:

• VT7670 / 4G modem

Notifications

Telegram, E-mail, FTP log, Syslog, SMTP, SNMP Traps, Web-to-SMS, and PUSH.

Protocols

DHCP; HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; Modbus RTU; OpenVPN.

Virtual sensors

PING, timers, triggers, Logic schemes, SNMP GET, x4 IP cameras, Virtual math elements, and others.

Physical Description

Front panel:

Open

Back panel:

Open

1. "Chassis grounding" - Chassis grounding, M4 thread. Enhances the immunity of the equipment against conducted and radiated RF disturbances. Please contact a professional electrician before connecting it.

2. "CAN" - digital connector RJ12 6P4C for the connection of CAN sensors/extensions/devices on a CAN bus. Modules can be chained together. Read the instructions in "CAN devises connection", and "Setting up CAN".

• "LED: CAN" - green LED indicates CAN bus status.

• The LED blinks slowly - nothing is connected

• The LED blinks fast - configuration is in process

• The LED glows constantly - connected to CAN device

3. "USB" - micro USB-port 2.0 is needed for USB camera recording, USB Flash for system logs, and system restoration. Read instructions at "Connecting USB camera", "USB camera settings. How to save a video", "Saving system logs on USB flash drive", and "USB upgrade or restore of default settings".

4. "LAN port" - Ethernet 10/100/1000 Mbps (1Gbps) Base-T port, provides an Ethernet connection. Read more in this section "LAN, GSM, LTE, RADIUS, DNS, SSL, VPN".

• "Orange LED" - orange LED for Ethernet port. It shows 10/100 Mbps network traffic.

• "Green LED" - green LED for Ethernet port. It shows 1Gbps network traffic. Flashes green when the system starts up. Shows the connection state (constant green light - the connection is established, blinking green - the connection attempt).

5. "SD card" - MicroSD card slot with an ejector. The card is needed for data storage or the "system restore". Read instructions at "Saving system logs to SD card", and "Restore of the appliance (for VT960 series)"

6. "Modem slot" - "VT7670 4G LTE modem " can be installed in this slot. This modem is ordered separately. Read more at "Networking".

7. "N-R switch" 

• Normal mode: The switch is switched to the left ←. The switch should be always in this position.

• Restore of appliance: The switch is switched to the right →. Used to load the clean system image from an SD card. Read instructions at “Restore of appliance”

8. "Restart" - the button restarts the appliance. Hold the button for 2 seconds and then let go, and the system will restart.

9. LEDs:

9a. "LED: Activity" - green LED indicates appliance system status,

• - operating mode of the device: switches at a frequency of 2 times per second;

• - successful completion of the software update process: switches at a frequency of 4 times per second;

9b. "LED: Alarm" - The LED can be programmed from the interface for alarm indication.

9c. "LED: Error" - red LED indicates error and traffic.

• the operating mode of the device: If everything is normal, the LED is extinguished, if not - there's a constant glow;

•  software update mode: switches at a rate of 2 times per second;

9d. "LEDs: E1" - status indicators for 12V 0.25A output on the back panel.

• The LED is ON (orange) - the output is ON (the initial state can be configured).

• The LED is OFF (orange) - the output is OFF ((the initial state can be configured).

10. "TEMPERATURE SENSOR" - accuracy +/- 1 °C.

11. "DC 12V POWER"- 12V DC 2A main power input (⌀ 5.5/2.1mm).

12. "DC 12V BACKUP POWER" - 12V DC 2A alternative power input. Pitch 3.81mm, 2P. Read more at Connecting backup battery .

13. REDUNDANT BATTERY: 9-11.1 V, DC (PH-2AW connector, 2mm, 2P)

14. STATIC - DHCP: Switch to select IP mode: Static (manual IP settings) or DHCP (automatic network configuration).

15. "DRY CONTACT INPUTS 1 & 2" - Digital inputs (Type IN). Pitch 3.5mm, 6P. Read the instructions at "Connecting dry contacts", and "Dry contacts settings".