Network settings (v2.0.1 - v2.2.5) (legacy)
To configure network settings go to tab "Preferences" >> "Network" . Change the network settings to the needed values and click "Save".
Available network device settings:
1 | Enable DHCP | enable or disable DHCP connection |
2 | Hostname | Host name of the device |
3 | IP Address | IP-address of the device |
4 | Network mask | Netmask |
5 | Broadcast | Broadcast address |
6 | Gateway | Default gateway |
7 | Primary DNS | Primary DNS |
If the default gateway is not known, use IP-address of the computer in the network of the device, which is usually included. The device uses the default gateway to test the network with low traffic.
Determination of IP-address
To determine the IP-address of the device insert USB-flash into the device as shown on the picture above, the device will automatically create "dumplog_date_time.txt" file with the current settings (including IP-address) in the root of the USB-flash. After the LED on the USB-flash will stop blinking, remove the drive from the device. Connect the USB-flash to your PC. Open the "dumplog_date_time.txt" file using a text editor.