Network settings (v2.0.1 - v2.2.5)

To configure network settings go to tab  "Preferences" >> "Network" . Change the network settings to the needed values and click "Save".

Available network device settings:

1Enable DHCPenable or disable DHCP connection
2HostnameHost name of the device
3IP AddressIP-address of the device
4Network maskNetmask
5Broadcast

Broadcast address

6GatewayDefault gateway
7Primary DNSPrimary DNS

If the default gateway is not known, use IP-address of the computer in the network of the device, which is usually included. The device uses the default gateway to test the network with low traffic.

Determination of IP-address

To determine the IP-address of the device insert USB-flash into the device as shown on the picture above,  the device will automatically create  "dumplog_date_time.txt" file with the current settings (including IP-address) in the root of the USB-flash.  After the LED on the USB-flash will stop blinking, remove the drive from the device.  Connect the USB-flash to your PC.  Open the "dumplog_date_time.txt" file using a text editor.