Sometimes you may need a full software recovery in the appliance. You will need cable USB-A - miniUSB, PC with Windows, with installed USB Nuvoton driver.
WinUSB4NuVCOM_NUC970_02-10-2014.zip
Complete the driver installation and connect PC to the monitoring unit switched in Recovery mode. For that turn the power on, connect cable USB A - miniUSB port to PC USB input and "NS" input of appliance.
You will see in PC manager:
Attention! All user information and preferences will be destroyed forever if a full software recovery is used! |
Start the Hardware Wizard. Download NuWriter programm zip file and put unzipped files into some folder. Download file vutlan-xxx-xxx.bin, from the drivers directory (choose the version you need).
Run NuWriter.exe and choose processor type NUC976DK62Y
Push Continue and choose SPI mode:
Choose Image name vutlan-xxx-xxx.bin. First Push Re-Connect in the right top corner, it will light green (that s OK), then push Eraseall and wait until finished,
then push Burn and wait until finished!
Attention! Never use MTP mode. You will kill processor. |
Set the appliance to «Normal» mode. In order to do this, turn off the appliance, switch the DIP switch "Recovery" to the mode "Normal". Device is ready.
developer notes: linkchange