Table of contents

Sending trap by the event from the door sensor

1. Rename the door sensor for convenience. To invert the state of the sensor use Reversed.

2. Create a notification element SNMP: Add ->Add Mailer SNMP Trap. Rename it in the Door Sensor Alarm trap.

3. Use «Send test message» to send a test notification. Finally, it should be something like this: 

4. Create a logic element to link events to notification Preferences->Logic schemes->Add. Rename the logic as you want it.

5. When the Door sensor passes in Alarm status, the Door Sensor Alarm Trap will be sent.

Sending trap by the event from a temperature sensor

1. Rename Temperature Sensor. Use the slider to set the sensor thresholds.

2. Create a notification element SNMP: Add ->Add Mailer SNMP Trap. Rename it in Temperature Sensor Alarm Trap.

3. Use «Send test message» to send a test notification. Finally, it should be something like this: 

4.  Create a logic element to link events to notification Preferences->Logic schemes->Add. Rename the logic as you want it.

5. When the Temperature Sensor passes in Alarm status, the Temperature Sensor Alarm Trap will be sent.

Sending trap by the event from a humidity sensor

1. Rename Humidity Sensor. Use the slider to set the sensor thresholds.

2. Create a notification element SNMP: Add ->Add Mailer SNMP Trap. Rename it in Humidity Sensor Trap.

3. Use «Send test message» to send a test notification. Finally, it should be something like this: 

4. Create a logic element to link events to notification Preferences->Logic schemes->Add. Rename the logic as you want it.

5. When the Humidity Sensor passes in Alarm status, Humidity Sensor Alarm Trap will be sent.