View Source

Article contents:

Saving the current monitoring settings

Monitoring settings are not saved after a reboot. To save after reboot, you need to make a call:

savetoflash - saves current settings to flash memory;

The current settings are reserved by calling settings.htm ("GET" method)

If you call without parameters (param field is absent), all settings are backed up.

To selectively reserve settings, you must set the appropriate parameters in the param field, using a space as the separator.

Table. Parameters of selective reservation

Parameter	Description
monitoring	Monitoring: modules, sensors, groups, map, USB web-cam etc
canbus	CAN bus configuration
dbusers	Users DB
dbkeys	Access keys DB
datetime	Date and time configurations
network	Network settings
http	HTTP Server settings
log	Logging settings
radius	Radius settings
snmp	SNMP settings
dyndns	DynDNS
update	Settings of update
backup	Settings of backup

getftpbackup - get FTP backup settings;
setftpbackup - set the parameters of FTP Backup:
- noreboot - if the key is equal to "1", then the reboot, after the configuration of the settings, will not be performed;
- address - the address of the FTP server;
- port - FTP server port;
- rdir - remote directory on the FTP server;
- username - FTP server username;
- password - FTP server user password;
- interval - backup interval:
  - 'never' - the function is disabled;
  - 'daily' - daily;
  - weekly - weekly;
  - "monthly" - monthly;
- day - day (week or month) of reservation (for the day of the week (1..7), 1 means Monday));
- hour - hour of reservation (00..23);