To control the settings of the SNMP agent, use the following values ​​of the querytype field:

• getsnmp - get the parameters of the SNMP agent;
• setsnmp - set SNMP agent parameters
  
  • enable - disable / enable SNMP protocol (0 / 1), disable by default;
  • version - protocol version, possible values:
    • '' v1 / v2c ';
    • 'v3';
  • rocommunity - community for reading (v1 / v2c);
  • rwcommunity - community for writing (v1 / v2c);
  • user - user name (v3);
  • level - security level (v3), possible values:
    • 'noauth' - without authorization and encryption;
    • 'auth' - only authorization;
    • 'priv' - authorization and encryption;
  • auth_type - type of authorization (v3), possible values:
    • 'MD5';
    • 'SHA';
  • auth_pass - authorization password (v3);
  • priv_type - type of encryption (v3), possible values:
    • 'DES';
    • 'AES'
  • priv_pass - encryption password (v3);

After you set the parameters, you do not need to reboot the system. Only the snmpd service is automatically rebooted and the changes take effect.