To update the software via the interface (HTTP), first, upload the appropriate driver from our "drivers" section.
Then go "System menu" >> "Firmware" tab >> "Upload source" >> "From local filesystem" >> "Select file".
Select driver upgrade file and press "OK". After the update is complete the web interface displays the message "Firmware Upload".
Upgrade files may have different names:
The updating process is indicated by LEDs on the front panel of the device: file installation is indicated by switching ERR, the end of the installation process is indicated by a short-term increase in switching frequency ACT. Then all the lights switch off - the system is rebooted. Completion is indicated by switching reboot ACT.
Do not restart the device on your own at this moment, this may damage the program and require a full flashing. |
The update duration is approximately 2 minutes. After the reboot (all LEDs are turned off) after 30-60 seconds, check the system operation.