At installation on Air conditioners, fans, and other places to measure wind (airflow) velocity. Sensor controls airflow 0 - 3 m/s. The product page can be found here: "VT550 / Wind velocity meter"
Package contents can be found here: VT550 package contents
The sensor is sold precalibrated. But it is possible to calibrate the meter sensitivity manually if needed. Use a flat-head screwdriver to adjust the sensor sensitivity.
Mounting bracket is supplied with each "VT550 / Wind velocity meter". Use a wire-cutter and pliers to cut and bend the bracket to Your needs.
Bracket steel thickness is 0.8 mm. Below You can find how users can mount the "VT550 /Wind velocity meter" with such a bracket.
"RJ11/RJ12" to "RJ11/RJ12" cable pinouts:
RJ9 4p4c to 3 pin JST cable pinouts:
VT550 / Wind velocity meter | |
---|---|
Dimensions | 600×18x18 mm |
Weight | 106 g |
Inputs | RJ9 (4p4c) |
Outputs | RJ11 / RJ12 (6p4c) |
Operating temperature | Min. -10° C, Max.80° C |
Operating humidity | Min. 5% - Max. 95% (Non-Condensing) |
Mounting | Mounting bracket included for installation inside IT racks and cabinets |
Power consumption | 60mW |
Max. distance from the monitoring unit | 50 m |
HS Code | 9026 80 200 |
Components | Manufactured in E.U. |
Special features | Response time 0.1 sec. |
Other | The sensor is sold with preconfigured sensitivity. |
Developer notes: add RJ9 4p4c to 3 pin JST cable pinouts: