To configure network settings go to tab "Preferences" >> "Network" . Change the network settings to the needed values and click "Save".
Available network device settings:
1 | Enable DHCP | enable or disable DHCP connection |
2 | Hostname | Host name of the device |
3 | IP Address | IP-address of the device |
4 | Network mask | Netmask |
5 | Broadcast | Broadcast address |
6 | Gateway | Default gateway |
7 | Primary DNS | Primary DNS |
If the default gateway is not known, use IP-address of the computer in the network of the device, which is usually included. The device uses the default gateway to test the network with low traffic.
To determine the IP-address of the device insert USB-flash into the device as shown on the picture above, the device will automatically create "dumplog_date_time.txt" file with the current settings (including IP-address) in the root of the USB-flash. After the LED on the USB-flash will stop blinking, remove the drive from the device. Connect the USB-flash to your PC. Open the "dumplog_date_time.txt" file using a text editor.