This section includes child pages:
Connect the analog sensor by a supplied RJ-11 (6P4C) cable to any analog port "A1 .. A8" or "Sensor" port. The determination of the sensor type and connection will occur automatically.
.jpg?version=1&modificationDate=1707204636707&cacheVersion=1&api=v2&width=760 "Documentation (English) > Analog sensors connection > Vutlan analog sensor connection (Analog ports).jpg")
If strong electromagnetic interference is present, we recommend using a 3-pair cable CAN FTP for sensor connection! |
%20pinouts%20cable.jpg?version=1&modificationDate=1707204779856&cacheVersion=1&api=v2&width=760 "Documentation (English) > Analog sensors connection > RJ11 RJ12 (6p4c) pinouts cable.jpg")
1- Yellow, 2- Green, 3- Red, 4 - Black
Colors are true for this telephone cable. Both ends match the colors and pinouts (identical).
Please refer to the RJ connectors comparison table:
Some of the analog sensors can be connected to a daisy chain. Please refer to the article "Chain Connection of analog sensors".
ok = tested x = failed |
Model | 50m | 100m | 120m | 150m | 200m | |
|---|---|---|---|---|---|---|
VT407 | AC current converter | ok recommended | ok | |||
VT410 | DC voltage monitor | ok | ||||
VT420 | Converter 4-20mA | ok recommended | ok | |||
VT500 | Temperature sensor | ok | ok | |||
VT501 | Outdoor temperature sensor | ok | ok | |||
VT510 | Humidity sensor | ok | x | |||
VT530 | Access sensor | ok | ||||
VT540 | Vibration sensor | ok | ||||
VT550 | Wind velocity meter | ok | x | |||
VT560 | Smoke detector | ok | ||||
VT570 | PIR sensor | ok | ||||
VT590 | Spot water detector | ok | ||||
VT591 | Water leak sensor | ok |
Using CAN extension "VT408 / Sensor extension unit" it is possible to increase the number of analog sensors connected to the monitoring unit up to 80 sensors.
.jpg?version=2&modificationDate=1707204813374&cacheVersion=1&api=v2&width=723 "Documentation (English) > Analog sensors connection > Analog sensors using CAN bus (Vutlan).jpg")