Other pages of interest:
More other pages of interest: "Connecting 1-Wire devices", "Access control", "Setting up 1-Wire".
This page includes:
Possible to connect only 1-Wire sensors with Maxim/Dallas chips.
In order to connect 1-Wire sensors or Itouch RFID reader, the system requires VT10 / 1-Wire board. This board is an extension for the monitoring systems.
I-Touch RFID reader or 1-Wire sensors or RFID reader can be connected to the port "1-Wire" after installation of the VT10 1-Wire board into any monitoring unit. The reader or sensors will be determined automatically.
Connecting 1-Wire sensors.
Use RJ9/ RJ11 splitter for 1-Wire connection.
Possible to connect only 1-Wire sensors with Maxim/Dallas chips.
Examples
Example 1:
Example 2: