U-prox SE mini / RFID reader

Connecting the reader

VT485r	Extension cable conductors	Reader U-prox SE Mini conductors	Reader U-prox SE Mini
+12	yellow	red	+12V
A+	brown	green	A+
B-	green	white	B-
GND	white	black	GND

The reader should have the following options:

Factory reset: Yes

Output interface: OSDP

In reading card: Absent

#	Pictures	Decription
1		Unscrew the M3 bolt from the reader.
2		User a screwdriver to push out two back panels from the reader. Pull the panel marked in orange from the reader.
3		The back panel can be installed on to a wall using dowels and screws.
2