Page Comparison

...

The following values ​​of the querytype field are used for management:

...

getgsm - get the parameters of the GSM modem

...

:

• id - identifier of the GSM modem element;
• period - optional, if available, issues a list of SMS for the specified period, possible values are:
  
  • '100seconds' - the last 100 seconds;
  • '100minutes' - the last 100 minutes;
  • '100hours' - the last 100 hours;
    
  • '100days' - the last 100 days;
k - user session ID.

...

<gsm 

...

pin="

...

1111" 

...

creg="

...

1" 

...

csq="

...

12" 

...

cops="

...

Aqua3" allowed="+

...

65214567788 +32154897744" smsc="59537322611" >

...

	<sms_list>
		<sms id="

...

2545109407" 

...

to="

...

+65214567788" 

...

text="

...

test message 1" status="

...

failed" 

...

date="

...

1563176384" />

...

		<sms id="

...

3784153937" 

...

to="

...

+98521141100" 

...

text="

...

test message

...

 A" status="pending" date="1563176803" />
		<sms id="

...

1598774555" 

...

to="

...

+98521563322" 

...

text="

...

test message

...

...

3" 

...

status="

...

sent" 

...

date="

...

1563177201" />
	</

...

sms_list>
</

...

gsm>

Description of the xml nodes:

• element - the properties of the GSM modem element:

• id - identifier;

• module - module identifier;

• clas - class of the device;

• type - device type;

• state - state:

  • 'normal' - the modem is ready to send SMS;

  • 'alarm' - there's an internal error.

• name - the name of the device;

• value - modem signal strength in %;

• imei - international identifier of mobile equipment;

• pin - SIM PIN code;

sms_centre - SMS center numbergsm - SGM modem settings and status;

• pin - SIM's PIN code;
• allowed - list of numbers from which SMS - commands are allowed, division of numbers through a space ' ';

• status - current state of the modem:

  • 'initialization' - modem initialization;
    
  • 'found, initialization' - modem found, continued initialization;
    
  • 'turn on time out' - timeout for the modem to turn on;
    
  • 'found, ready' - the modem is ready to work;
    
  • 'found, not ready' - the modem is not ready or defective;
    
  • 'SIM-card not inserted' - SIM card installation error;
    
  • 'PIN code required' - PIN code required;
    
  • 'PIN code invalid' - the PIN is incorrect;
    
  • 'PIN code length incorrect' - the length of the PIN code is incorrect;
    
  • 'PIN code must be digit' - the PIN must consist only of digits;
    
  • 'PUK code required' - PIN blocked, PUK code required;
    
  • 'SMS Center number incorrect' - the SMS center number is incorrect;
    
  • 'error sending SMS' - SMS sending error;
    
  • 'command maximum repeated' - the maximum number of attempts to send an AT command;
    
  • 'reset modem' - restart of the modem;
    
  • 'number of resets is exceeded' - the maximum number of attempts to restart;
    
  • 'modem turn off' - power to the modem is disabled;
• verbosity - the level of debugging information (more in the description "updateelement");
• balance - the balance information node, issued only when the balance number is set, after updating the balance with the command with the fields querytype = "updateelement" and ctrl="updatebalance" for the GSM Modem element; attributes are:
  • phone - balance service number;
    
  • text - the text of the response to the balance request;
    
  • t - the time when the balance information is received in the UTS;
• operators - the list of network operators, is issued only after updating the list of operators with the command with fields querytype="updateelement" and ctrl="updateoperators" for the GSM Modem element, attributes are:
  • current - the name of the current statement;
  • status - the status of the current operator in the network ; possible values are:
    
    • 'registered' - registered in the network;
      
    • 'not registered, searching' - searching the network;
      
    • 'not registered, not searching' - networks not found;
      
    • 'not registered' - not registered on the network;
      
    • 'registered roaming' - registered in roaming;
      
    • 'registration denied' - registration is prohibited.
  • signal - signal strength in the network in dB;
• operator - available operator:
  
  • id - the identifier of the operator;
    
  • status - operator status:
    
    • 'unknown': unknown;
      
    • 'available': registration is allowed;
      
    • 'current': current operator;
      
    • 'forbidden': registration is prohibited.
  • name - operator's text name.
• smslist - list of SMS, for sending the SMS there's a request send_sms_message;period - the period ('100seconds', '100minutes', '100hours', '100days')separator - space (example: +72224443434, +72224443435);
  
• smsc - the number of the SMS center, this field is empty if the number is determined automatically;
• creg - network registration status code:
  

  • 0 - not registered, modem is not currently searching a new operator to register to;

  • 1 - registered, home network;
  • 2 - not registered, but modem is currently searching a new operator to register to;
  • 3 - registration denied;
  • 4 - unknown;
  • 5 - registered, roaming.
• csq - signal strength in the network:

  • 0 – -113 dBm or less;

  • 1 – -111 dBm;
  • 2...30 – -109... -53 dBm;
  • 31 – -51 dBm or greater;
  • 99 – not known or not detectable;
  • 100 – -116 dBm or less;
  • 101 – -115 dBm;
  • 102...191 – -114... -26dBm.
• cops - current operator name.
  
• sms_list - queue of sent SMS;
  
  • sms - SMS in the queue:
    • id - identifier of SMS in the queue;
      
  state
  • • status - SMS status:
    'wait'
    • • • pending - added to the queue, waiting for sending;
    'send' -
    • • • failed - could not be sent;
    'error' - could not be
    • • • send - sent.
      • to
    _phone
    • • - phone number of the SMS's recipient;
    message
    • • text - SMS text;
    t
    • • date - the time when added to the queue in UTS.
    updateelement

  
  

  setgsm - set GSM modem parameters, additional fields are:

  • id - identifier of the GSM modem element;
    
  name - the name of the modemk - user session ID;
  • pin - SIM's PIN code;
    
  • sms_centre

    smsc - the number of the SMS center

    . It is read when determining the presence of the SIM-card and is stored only on the SIM-card

    , leave this field blank for automatic determination;

  • allowed - list of numbers from which SMS commands are allowed, separator - space (example: +72224443434, +72224443435);
    
  • balance - the number used for request of the balance and the state of the account;
    
  • operator - manual installation of the operator of cellular communication;
    
  • verbosity - the level of debugging information (by default 2nd level). The possible values ​​are:
    
    • level 0: Emergency - the system is not operational: the maximum number of retries of AT commands, the modem initialization error, the SIM card is not inserted, the maximum number of retries of automatic modem re-uninstitution, the allocation error of dynamic memory;
      
    • Level 1: Alert - urgent intervention is required: PIN code is required, error when sending SMS;
      
    • level 2: Critical - critical events: failure to send AT commands, incoming SMS processing error, modem reinitialization, SMS queue is full, the list of available operators is full, successful sending of SMS;
      
    • level 3: Error - error messages;
      
    • level 4: Warning - various warnings: text and error number of the AT command, SMS text conversion error;
      
    • Level 5: Notice - various important notifications: the version of the firmware of the modem;
      
    • level 6: Informational - information messages: change of SMS center number, registration status in the network, successful processing of incoming SMS;
      
    • Level 7: Debug - Detailed debugging messages, including exchange of AT commands.
      
  • ctrl - modem control, possible values:
    
    • "reset" - reset the modem;
      
    • "clearsmslist" - clear the SMS queue;
      
    • "updatebalance" - update the balance; asynchronous, in one minute the balance text is displayed in the log and stored in the text attribute of the balance node;
      
    • "updateoperators" - update the list of operators;
  send_sms_message - send SMS via GSM modem, parameters:
  • to_phone - the phone number of the recipient;
    
  message - SMS text.

  
  

  send_sms_message - send SMS via GSM modem, message add to SMS queue, parameters:

  • k - user session ID;
  • to_phone - the phone number of the recipient;
    
  • message - SMS text.

  
  

  clearsms - clear the SMS queue, parameters:

  • k - user session ID.

  
  

  sendussd - send USSD request for check the balance state, not supported in LTE mode, parameters:

  • k - user session ID;
  • to_phone - the balance service number.

  
  

  Code Block
  title Answer
  <ussd text="Account balance 55.6$. Some kind of advertisement here" /> <ussd text="Error parsing ussd answer" /> <ussd text="Request not supported in LTE mode" />