Notifications are intended to inform the user about events occurring in the monitoring Notifications are intended to inform the user about events occurring in the monitoring system.
To create a notification go to "Add" in the upper left corner of the interface, and select the needed element..jpg?version=1&modificationDate=1411046675038&cacheVersion=1&api=v2)
...
It is possible to add the following:
notification via E-mail "Add Mailer - Email";
notification via SNMP trap "Add Mailer - SNMP trap";
notification via SMS "Add Mailer - SMS";
Left-click on the menu item. Fill in the form in the window that appears and press "Save".
To test the notification you can press "Send test message".
Notification via E-mail
To create a notification via e-mail you have to specify the following parameters:
Parameter | Description |
|---|---|
Name | The name of the element in the system |
SMTP server | Name or SMTP server IP address (smtp.gmail.com) |
SMTP port | SMTP server on the correct port number. (e.g. 25 or 465 ) |
Login, Password | SMTP server username and password |
Mail from | Sender's e-mail address (sky25test@gmail.com) |
Mail to | Recipient's e-mail address (sky25test@gmail.com) |
Message | Text of the message |
...
Contact your mail administrator for assistance with configuring SMTP parameters or or the help section of your e-mail provider.
Notification via SNMP Trap
To create a notification via e-mail you have to specify the following parameters:
Parameter | Description |
|---|---|
Name | The name of the element in the system |
SNMP server | Name or SNMP server IP address (192.168.1.10) |
SNMP port | SNMP port (usually 162). |
Community | Community name (public) |
Version | Version (v1 or v2c) |
Notification via SMS
To create a notification via SMS you have to specify the following parameters:
Parameter | Description |
|---|---|
Name | The name of the element in the system |
Phone number | Phone number of the receiver (+421908315000) |
Message | Text of the message |
| Note |
|---|
Attention! |
...
For the SMS to display the correct time, make sure you have set the correct time zone in "Preferences" >> "Network" before sending the SMS. The time zone has to be the same as the time zone of your browser ( Operating system). See section |
...
Macros in the notification text
The text of the message can include macros. Macros have the following form:
%{number of macro}
When notification is When notification is created the system replaces the macros variables with actual the macros variables with actual values.
The following macros are available:
Macro | Description |
|---|---|
%1 | description of the logic scheme that has triggered |
%2 | readings of sensors in the logic scheme |
%3 | logic scheme response time |
%4 | name of the logic scheme |
%5 | name of the sensor which triggered the logic scheme |
%6 | state of the sensor in the logic scheme that has triggered |
%7 | the value measured by the sensor or logic level |
Example. If the text has the following form:
| Code Block |
|---|
%4 -- %1 -- %2 -- %3 |
When logic is triggered and the notification is triggered and the notification is sent, the recipient will see a message in the following form:
| Code Block |
|---|
Logic scheme name -- if 'S/N iButton'(id=13) in state 'alarm', then 'Email'(id=302) changes to state 'on' immediately 'Relay-0'(id=31) changes to state 'pulse' immediately -- 'S/N iButton'(id=13) in state 'alarm' -- 12:40:36 2012/01/18 |
| Info |
|---|
...
We recommend using a more informative form of message, by default |
...
it is written in the following form: |
| Code Block |
|---|
Logic %4:
--
Defintion:
%1
Current sensor state:
%2
--
System time: %3 |