Page Comparison

Function and purpose

Versatile miniature reader for proximity identifiers. Highly secure, open technology OSDPv2 reader. Resistant against moisture, dust, and vandal-proof. Easy to configure. The reader is always active. The reader is used together with VT485r / OSDPv2 reader extension slot

...

• Tolerates moisture and dust.

• Water-proof.

• OSDPV2 version.

• Works with Mifare Plus cards in SL3 security mode

• Reliable optical tamper reduces false tamper alarms.

• Low power consumption - smaller energy costs.

• Read range 5-10 cm

• The reader is always active.

...

Use cases

Here are some potential use cases for the SE Mini Reader:

1. Access Control: The SE Mini Reader can be used as part of an access control system, allowing authorized personnel to gain entry to secured areas by presenting their access cards or key fobs.

2. Time and Attendance Tracking: It can be implemented in workplaces to track employee attendance. Employees can swipe their ID cards to clock in and out, facilitating accurate timekeeping.

3. Visitor Management: Facilities can use the SE Mini Reader at reception areas to manage visitor access. Visitors can register their information and receive temporary access credentials to enter the premises.

4. Integration with Security Systems: When connected to a security system, the SE Mini Reader can enhance surveillance capabilities by logging access attempts, allowing security personnel to monitor who enters and exits specific areas.

5. Smart Lock Control: The reader can be utilized with smart locks in residential or commercial settings, enabling users to control access through RFID technology, enhancing security and convenience.

These use cases highlight the SE Mini Reader's versatility in enhancing security, facilitating transactions, and improving operational efficiency in various environments.

Technical specifications

...

Function and purpose	Description
Used for:	Provides access control of doors. Possible to use different keys, RFID cards and mobile keys.
Protocols	Description
Reads (Supported formats depends depend on the firmware):	Mifare, 13.56 MHz, ISO14443A, 4, 7, 10 bytes UID: Mifare Classic 1K/4K, Mifare Standard,Mifare Ultralight, Mifare Hi-Memory, Mifare Plus S 2K, Mifare Plus S 4K, Mifare Plus E 1K, Mifare Plus X 2K, Mifare SE 1K, Mifare Plus X 2K, Mifare X 4K, Mifare Plus EV1 2K, Mifare Plus EV1 4K, Mifare DESfire, Mifare DESfire EV1, Mifare DESfire EV2 NFC, 13.56, ISO 14443/15693 NFCm 13.56 MHz, ISO 14443/15693; RFID, 125 kHz: ASK and SK; 2.4 GHz mobile ID, U-Prox Tag, U-prox Auto Tag
Read range:	NFC, Mifare and RFID 125 kHz - up to 5 cm, 2.4 GHz radio - adjustable 10cm - 15 m
Environmental	Description
Interfaces:	OSDPAmbient
Operating temperature:	IP65, -40°C to +60°C
Power	Description
Power:	+9…+15 VDC, consumption < 80mA	Weight	70g
Consumption:	< 80mA
Maximum distance from the unit:	OSDP - up to 1000 m
Macanical / Packaging	Description
Protection:	IP65
Case material and colour:	ABS+PC plastic & black
Wiring and distance	8 wire cable, OSDP - up to 1000 m
Warranty
Weight:	70g
Dimensions:	Height 80.46mm, Width 44.28mm, Depth 12.76mm
Cable length:
Mounting possibilities:	Wall mount
Status Indicators:​	Green (access granted) / Red (access denied)
General	Description
Manufactured in:	Slovak Republic, E.U., Vutlan s.r.o.
HS code:
GTIN:
Warranty:	2 years after the purchase date

Connecting the reader to VT485r (OSDP)

Connect the reader to Vutlan using VT485r / OSDPv2 reader extension slot

Connect the reader directly to VT485r:

	VT485r	Reader U-prox SE Mini reader conductors	Reader U-prox SE Mini reader
	+12	red	+12V
	A+	green	A+
	B-	white	B-
	GND	black	GND

Connect the reader to VT485r using an extension cable:

	VT485r	Extension cable conductors	Reader U-prox SE Mini reader conductors	Reader U-prox SE Mini reader
	+12	yellow	red	+12V
	A+	brown	green	A+
	B-	green	white	B-
	GND	white	black	GND

Configure

...

SE mni reader

The reader should have the following options:

...

Output interface: OSDP

In reading card: Absent

...

Conductors

Drawings

Picture	Description
	Reader
	Mount plate

Installation

#	Pictures	DecriptionDescription
1		Unscrew the M3 bolt from the reader.
2		User a screwdriver to push out two back panels from the reader. Pull the mount plate marked in orange from the reader.
3		The mount plate (back panel) can be installed on to a wall using dowels and screws. Warning: Range decreases on metal surfaces.
4		Screw M3 screw back in

Readers near each other (close installation of readers)

If readers are located near each other, you can connect the yellow cables from one reader to another.

We are talking about synchronizing radio pulses on 125 kHz with close installation of readers.

Mobile ID

The reader supports Mobile IDs (2.4 GHz). Mobile phone read range from the reader is around 0-50cm (tested on iPhone 12).

You can purchase QR code keys. They look like this:

...

List of tested Mobile ID applications on a mobile that we advise:

Once you have purchased and added the keys to your mobile phone, the method of adding keys to a Vutlan web interface is the same as adding an RFID card.

Package content

External page included SE-mini package content

...

Copyright:

Vutlan s.r.o.

Remote Infrastructure Monitoring and Control

...