 |  |
Connecting the reader
VT485r | Extension cable conductors | Reader U-prox SE Mini conductors | Reader U-prox SE Mini | |
|---|---|---|---|---|
 | +12 | yellow | red | +12V |
A+ | brown | green | A+ | |
B- | green | white | B- | |
GND | white | black | GND |
Configure U-prox SE mni
The reader should have the following options:
Factory reset: Yes
Output interface: OSDP
In reading card: Absent
...
Drawings
...
Installation
# | Pictures | Decription |
|---|---|---|
1 |  | Unscrew the M3 bolt from the reader. |
2 |  | User a screwdriver to push out two back panels from the reader. Pull the panel marked in orange from the reader. |
3 |  | The back panel can be installed on to a wall using dowels and screws. |
2 |  | |
 |