...
Supported format is FAT32 and Ext4 (preferably). The SD card must be formatted by the user. The contents of the SD card can be obtained at the address 192/sdcard/, with login and password hash of current user, for example:
http://{login}:{hash}@192.168.0.193/sdcard/ (the default IP address of the device).
The files are recorded in a directory with the name formed from the device type name (for example VT300) and the value of the Network→Hostname field, and has the following form: VT300-DeviceName. If the name is not specified by the user (by default is: hostname), then the IP address of the device is used to form the directory name, and the name has the following form: VT300-192.168.0.193. Within this directory, directories are created for log files (log), dump files of changes (diff), and full dump files (full). File names are formed based on the time of their creation, and have the following form: 2016.11.17_16-37-43.log. The file name extension reflects its contents: log - for log files, diff.csv - for dump files of changes, full.dump - for full dump files. At the beginning of the log file, when it is created, service information about the type of device, firmware version, IP address and etc. Log files are written in text form. Dump files of changes (diffs) and dumps of sensor values are saved in text table format CSV. Full dump files are saved in text form.Record format "Protocol Buffers" is still only used for internal data representation.
Video files are saved in the subdirectory ./video/ , with the index of the camera with which the clip was received. The video format is AVI, the name is formed the same way as for the other files.
...
The FAT32 file system is supported. USB Flash Drive must be formatted by the user. The contents of the USB Flash Drive can be obtained from the address 192/usbflash/, with login and password hash of current user, for example:
http://{login}:{hash}@192.168.0.193/usbflash/
...
The names of directories and files are also formed as when working with SD Card.
...
The FAT32 and Ext4 file system is supported. HDD must be formatted by the user. The contents of the HDD can be obtained from the address 192/satahdd/, with login and password hash of current user, for example:
http://{login}:{hash}@192.168.0.193/satahdd/
...
The names of directories and files are also formed as when working with SD Card.
...