...
getsdcard - get information about the map, returns the response in the form
Code Block <sdcard state="normal" mpoint="/media/sdcard-sd54a1" fullsize="7808156" freesize="7806524" lifetime="31536000" enablelog="1" enablelogvideo="1" />
, where:
- state - the state of the medium:
- normal - the operating state, the carrier is installed;
- not connected - the medium is not installed or removed from the connector;
- off - the media is unmounted with the umount command;
- normal - the operating state, the carrier is installed;
- mpoint - mount point of the medium in the system;
- fullsize - total amount of memory, in KB;
- freesize - the amount of free memory in KB;
- lifetime - the lifetime of the files, in seconds (the default is 7 days, ie 604800 seconds);
- enablelog - logging to this media is enabled or disabled (0 - disabled, 1 - enabled);
- enablelogvideo - saving of video files to this media is enable or disable (0 - disabled, 1 - enabled);
- state - the state of the medium:
- setsdcard - set the logging parameters on the SD card. Extra options are:
- cmd - command; it's possible values are:
- umount - unmount the file system for safe extraction;
- restart - restart, close current log and dump files and create new files;
- umount - unmount the file system for safe extraction;
- lifetime - the lifetime of the files, in seconds (minimum 3 hours, maximum 1 year);
- enablelog - enable / disable the logging process to this media (0 - disabled, 1 - enabled);
- enablelogvideo - enable / disable saving of video to this media (0 - disabled, 1 - enabled);
- cmd - command; it's possible values are:
...
getusbflash - get information about the flash drive, returns the response as
Code Block <usbflash state="normal" mpoint="/media/usbhd-sda1" fullsize="7808156" freesize="7806524" lifetime="31536000" enablelog="1" enablelogvideo="1" />
, where:
- state - USB Flash Drive status:
- normal - working state, the flash drive is installed;
- not connected - the flash drive is not installed or removed from the connector;
- off - the flash drive is unmounted by the umount command;
- ;
- normal - working state, the flash drive is installed;
- fullsize - total amount of memory, in KB;
- freesize - the amount of free memory in KB;
- lifetime - the lifetime of the files, in seconds (the default is 7 days, ie 604800 seconds);
- enablelog - logging to flash is enabled or disabled (0 - disabled, 1 - enabled);
- enablelogvideo - saving of video files to this media is enabled or disabled (0 - disabled, 1 - enabled);
- state - USB Flash Drive status:
- setusbflash - set the parameters of the log on the USB flash drive. Extra options are:
- cmd - command; it's possible values are:
- umount - unmount the file system for safe extraction;
- restart - restart, close current log and dump files and create new files;
- umount - unmount the file system for safe extraction;
- lifetime - the lifetime of the files, in seconds (minimum 3 hours, maximum 1 year);
- enablelog - logging process on the USB flash drive is enabled or disabled (0 - disabled, 1 - enabled);
- enablelogvideo - saving video to USB flash drive enabled or disabled (0 - disabled, 1 - enabled).
- cmd - command; it's possible values are:
...
getsatahdd - get information about the drive, returns the response as
Code Block <satahdd state="normal" mpoint="/tmp/mnt/satahdd" fullsize="7808156" freesize="7806524" lifetime="31536000" enablelog="1" enablelogvideo="1" />
, where:
- state - HDD status:
- normal - working state, the drive is installed;
- not connected - the drive is not installed or removed from the connector;
- off - the drive is unmounted by the umount command;
- ;
- normal - working state, the drive is installed;
- fullsize - total amount of memory, in MB;
- freesize - the amount of free memory in MB;
- lifetime - the lifetime of the files, in seconds (the default is 7 days, ie 604800 seconds);
- enablelog - logging to disk is enabled or disabled (0 - disabled, 1 - enabled);
- enablelogvideo - saving of video files to this media is enabled or disabled (0 - disabled, 1 - enabled);
- state - HDD status:
- setsatahdd - set the parameters of the log on the drive. Extra options are:
- lifetime - the lifetime of the files, in seconds (minimum 3 hours, maximum 1 year);
- enablelog - logging process on the drive is enabled or disabled (0 - disabled, 1 - enabled);
- enablelogvideo - saving video to drive enabled or disabled (0 - disabled, 1 - enabled).
- lifetime - the lifetime of the files, in seconds (minimum 3 hours, maximum 1 year);
...